Responsible For An Electric Fireplace Wall Hanging Budget? 12 Top Ways To Spend Your Money
Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces can be put to use right out of the box. They're a great way to add the ambience without venting or reworking.
wall mount modern electric fireplace are usually heavy and require careful installation. Follow these steps to set up your new electric fireplace correctly.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly improves the look of any room. It's a perfect option for homes with no existing fireplace opening, or for apartment residents.
Choose where you'd like to place your electric fireplace. It is important to choose a location that won't be susceptible to moisture and at least a few inches away from furniture, drapes and areas that are prone to traffic. Once you've located a location you like, mark the wall with layout marks for the top and bottom plates of the fireplace frame.
Use a drill or other tool to make exploratory holes in the wall. Examine for studs with an stud-detector. Then, mark the drywall with the location of the fireplace mounting brackets. Then, you need to build out the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on the wall-mounted fireplace you select, you might require the installation of both the firebox and screen in one unit, or separate them with a wall bracket. If you're not sure about your ability to finish this project, hire a general contractor or an experienced carpenter.
You can find a template included with most electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark the exact location where the wall brackets will be erected. Before drilling, make use of the template to check that the fireplace's power cable can reach from the installation site to a nearby outlet to plug it in.
Once the studs and fireplace frame are in place, you can put in drywall that is as seamless and flush as is possible to give a neat appearance. Add trim to the bottom edge, and then paint, sand and then finish the frame.
You'll need to put the hooks or slots on the back of many wall-mounted electric fireplaces into the brackets for mounting. Make sure that the slots and hooks are aligned before connecting the fire to the wall brackets. Once the fire is in position you can add additional elements such as crystal embers or driftwood log pieces or decorative rocks.
2. Check the Bottom Bracket
The space above a fireplace mantel, chimney breast or mantel is a prime spot for hanging artwork. However, there is a line of distinction between an artistic arrangement & one that detracts from the overall look of the fireplace design.
A common rule is that a photograph should not exceed 80% of the size of the fireplace or mantel it's placed on. This will allow it to remain proportionate & look aesthetically pleasing on the wall. This rule of thumb could be affected by other ornaments and decorative items on the mantel.
If you are planning to hang a photograph above your electric fireplace the frame must be constructed of glass or a material that is able to withstand high temperatures. If you're unsure then a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this type of application.
The possibility of destroying artwork through smoke and scattered heat is a common issue when displaying artwork over a fireplace. This is not an issue with gas or wood-powered fireplace. However when you are planning to install an electric wall-mounted fire, it's important to check the instructions provided by the manufacturer.
Most electric fires are equipped with a mounting bracket which can be attached to the wall with hanging screws or wall-mounted fixing systems. It is recommended to drill exploratory hole in an area that is distinct from the wall prior to mounting your electric fire. wall mount modern electric fireplace can then use a pipe and cable finder to make sure there aren't any cables or pipes close to the location where you want to mount your fire.
If they are there are, you may decide to put your fire over the electrical socket or move it to a new location. If you decide to move it, be sure that the power cable is able to reach the electrical socket. This is important for older homes or those with solid walls. In the event that it doesn't the electric fire won't be able to function properly. Some models come with templates that show you where to drill holes while others require you to use a pencil and a spirit level to mark the locations on your wall.
3. Connect the Power Cord
You may have to move your plug socket behind the unit if you have installed a fireplace with a recess. This can give it a cleaner appearance. Be sure to test the fireplace before you do this to ensure that everything is working exactly as it should.
Another popular method to install an electric fireplace is to frame space and incorporate it into the wall. This gives it a finished traditional look and also allows you to add a mantel. The owner's manual for your specific model will have details on framing, securing your fireplace, and wiring.
The location of your electric fireplace on the wall with a marker or pencil. Use a carpenter’s level to ensure that the installation area is flat and level. You can use a studfinder to mark the location so you can be sure you're drilling in a safe location.
Use the electric drill after you have identified the location of installation to create holes for the bracket screws or hanging screws. Follow the instructions in the owner's manual for this step. This is especially important if you are installing the fireplace in the drywall. If you're not sure how to do this, you can always ask an expert to handle the installation for you.
A cable organizer kit can be used to conceal power cords. These kits typically include sleeves, clips, or boxes for bundling cables. You can use wire snakes or fish tape to guide the cords. If you do not want to cut the wall, a powerbridge kit will provide a cleaner and more secure connection.
You can also disguise cords using paintable wire covers or by adhering them to the wall. Keep the cover or tacks far away from sources of heat. This will protect the cord from damage and also prevent accidental contact.
4. Connect the Adapter
A wall-mounted electric fireplace is a fantastic option for a home renovation or for those who don't have the space or funds to build a gas fireplace. They are simple to hang and are ready to use straight out of the box. They're an excellent alternative for those who want an elegant, modern design or warmth from a fire. These units are designed to be hung like artwork on any wall. They can be recessed or not at all recessed and are fully electric with fan-powered heating.
Before you start the actual installation process it's recommended to make a list of all the tools and equipment you'll require. Check the user manual for specific information about how to install your electric fire. Certain models require that you screw brackets directly into the wall while others could have mounting plates that slide into slots or hooks onto the brackets. If you're installing a recessed unit it is important to make sure that all combustible materials are taken from the area of installation. In general they should be kept at least 3 feet from the front of the fireplace and 1.5 feet from its sides.
After you have inspected all the components After you have checked all the components, connect your electric fire and ensure that it works. This is an important step since it will ensure that the flame effect screen and heater work as intended. This will give you a good idea of the final product's final state.
If you're confident that your electric fire is operating correctly, you should consider covering the power cord. This will help keep the finished product neat and tidy. It is possible to achieve this by installing a new outlet using the cord that is hidden behind the unit. This will give your fireplace a seamless finish.